Finding the right bass boat electronics mount improves visibility, stability, and reliability of your fish finder, charts, and GPS displays. This guide compares five top options to help anglers decide which mount fits their console, seating, and fishing style. Best for daily anglers, tournament competitors, and weekend racers, these mounts address common needs like glare reduction, vibration control, and easy adjustability. Use the summary table below to quickly compare the top choices, then read the detailed sections to understand which mount is best for your boat and setup.
Summary of Selected Products
| Product | Best For | Key Benefit |
|---|---|---|
| Universal Adjustable Fish Finder-Graph-Electronics Mount | Moderate consoles with flexible tilt | Adjustable 40 degrees; universal bolt pattern |
| Bzcovac Marine Electronic Mount | Saltwater or freshwater boats needing reach and range | 350° swivel; 18–24″ height adjustment |
| Str8 Up Mounts Fish Finder Mount Standard Dual Plate | Dual-unit setups and wide compatibility | 12×10 inch dual-plate design; universal mounting |
| PROcise Outdoors DEK-It Dash Mount | Dashboard-focused, glare-free viewing | Single or dual unit options; American-made |
| PROcise Outdoors Angled Deck Mount | Pro-level console setups with angled viewing | 22.5° angle; corrosion-resistant |
Universal Adjustable Fish Finder-Graph-Electronics Mount
The Universal Adjustable Fish Finder-Graph-Electronics Mount is designed for boats that need flexible placement with a universal bolt pattern. Best for anglers who want a straightforward, mid-range option that fits a variety of graph sizes. The mount offers adjustable tilt up to 40 degrees, which helps minimize glare in bright sun and aligns screens to your seated or standing position. It uses 3/16 inch aluminum stainless steel hardware for corrosion resistance in mixed-water environments, making it a solid all-around choice for fresh or saltwater setups. A potential limitation is compatibility with unusually large or nonstandard displays that require longer mounting plates.
Bzcovac Marine Electronic Mount
The Bzcovac Marine Electronic Mount is built for rugged marine use with corrosion-resistant anodized aluminum and included heavy-duty stainless steel hardware. It offers an adjustable height from 18″ to 24″ and a full 350° monitor plate swivel, plus 180° base swivel and 180° riser tilt. This makes it a strong pick for boats where displays must be viewed from multiple seating positions or when the deck layout changes between sitting and standing. Choose this if you want maximum viewing flexibility and sturdy construction; caution: installation may require precise alignment to achieve optimal tilt and swivel range.
Str8 Up Mounts Fish Finder Mount Standard Dual Plate
The Str8 Up Mounts Dual Plate Mount is ideal for boats needing two displays side by side. Constructed from heavy-duty marine-grade aluminum, it supports most major brands—Garmin, Lowrance, Humminbird, Raymarine, and Simrad—thanks to pre-drilled holes and universal slots. Its 12×10 inch footprint with a reinforced center bend design provides a stable base for dual fish finders or navigation displays. Best for anglers who want a broad, universal mounting solution that minimizes crowding on the dash. Limitation: larger or unusually shaped devices may require additional drilling or custom fit work.
PROcise Outdoors DEK-It Boat Fish Finder Mount
The DEK-It Dash Mount from PROcise Outdoors elevates your fish finder above the dash to reduce glare and improve visibility. Available in single (about 10-1/16 inches) and dual (about 24.75 inches) versions, these mounts are crafted from 3/16 inch aluminum and are made in the USA. They fit most flat-faced consoles and support Humminbird, Lowrance, and Garmin units. Choose this for glare reduction and clearer readings during busy days on the water. A limitation is that some angled dash configurations may require additional gimbal or tilt accessories for optimal alignment.
PROcise Outdoors Angled Deck Mount
The Angled Deck Mount by PROcise Outdoors provides a 22.5-degree viewing angle, delivering pro-level visibility while seated or standing. Made from marine-grade aluminum with a corrosion-resistant coating, it offers rigidity and vibration control for stable displays during rough water or fast maneuvering. It is broadly compatible with Garmin, Lowrance, and Humminbird units and is designed for easy adaptation to most bass boat consoles. Best for anglers who prioritize precise screen angle and glare-free viewing; limitation: the 22.5-degree angle may not suit every console layout without adjustment elsewhere on the mounting system.
Omega Boat Step Dual Bow Mount
The Omega Boat Step Dual Bow Mount is a heavy-duty option designed to hold two 12″ graphs with integrated hardware. This dual electronics mount fits most bass boats and provides sturdy support for dual displays in a bow-position setup. Best for anglers who want a secure, two-display configuration at the bow; caution: bow-mount configurations can alter weight distribution and may require careful ballast or mounting on larger boats.
Buying Guide: Key Purchase Considerations
- Display compatibility: Check bolt patterns, VESA compatibility, and the number of displays you plan to mount.
- Adjustability: Consider tilt, swivel, and height options to match seating position and glare conditions.
- Material and durability: Look for marine-grade aluminum or stainless hardware and corrosion resistance for saltwater use.
- Ease of installation: Assess mounting patterns, required tools, and whether the mount fits your console layout.
- Space and layout: Ensure the chosen mount leaves room for steering, controls, and foot space without obstruction.
- Brand and ecosystem: If you own multiple brands (Garmin, Lowrance, Humminbird), choose a universal or dual-brand-friendly mount.
Frequently Asked Questions
- Are universal mounts compatible with most fish finders?
- Is it better to mount at the dash or on the bow?
- What is the importance of a high degree of swivel?
- Do I need to drill into my boat for these mounts?
- Which mount is best for two displays?
- Are these mounts suitable for saltwater boats?
Yes, many universal mounts offer standardized bolt patterns and adjustable plates to accommodate a range of brands and display sizes.
Dash mounts provide centralized access, while bow mounts offer a clear forward view for the driver and passengers. Choice depends on boat design and fishing style.
A wide swivel range allows the screen to be viewed from multiple seating positions and reduces glare from sunlight.
Some mounts use existing holes or pre-drilled patterns, while others may require drilling. Follow manufacturer instructions to maintain hull integrity.
Dual-plate or dual-deck mounts are designed to hold two units side by side, providing easy comparison and quick access to both screens.
Look for marine-grade aluminum, anodized finishes, and corrosion-resistant hardware to endure saltwater exposure.