If you are replacing worn trailer hub seals on a 3500 lb axle, you need reliable double-lip grease seals with compatible dimensions. This guide highlights five well-matched options and who they’re best for, helping you avoid leaks on waterways, ramps, and long road trips. Each choice is explained with install-fit clarity, practical cautions, and why it stands out for specific trailer setups.
Summary table of selected products:
| Product | Best For | Key Fit | Notes |
|---|---|---|---|
| TiciKim 4Pcs Trailer Axle Hub Wheel Grease Seals | DIYers needing a ready-made 4-pack | ID 1.719″ x OD 2.565″ | Includes cotter pins; verify old seal size first |
| DEEPDREAM 2 Sets 3500lb Bearing Kit | Complete kit with multiple components | Seals 1.72″ x 2.56″ | Two sets for convenience; good bundle value |
| WPS 2-Pack 168233TB | Single-seal replacements for 3,500–4,200 lb axles | ID 1.688″ x OD 2.332″ | Double lip, 1 unit per package |
| iBroPrat 4pack | Budget-friendly replacement seals with pins | ID 1.719″ x OD 2.565″ | Includes cotter pins; Dexter/010-019-00 compatible |
| XiKe 2 Set Trailer Bearings Kit | Bearings, races, and seals together | Seal OD 1.980″ | Includes cotter pins and dust cover |
TiciKim 4Pcs Trailer Axle Hub Wheel Seals
Best for DIY replacements where you want a ready-to-install kit with matching cotter pins. This set is designed for Dexter 010-019-00 (10-19), Transcom 171255TB, National 473336, and similar #84 spindles. The seals measure ID 1.719″ and OD 2.565″. The kit’s cotter pins streamline reassembly. Choose this if you prefer a single, cover-all solution for common 3,500 lb hubs and EZ-Lube systems. Limitation: verify your old seal’s dimensions before purchase to ensure exact fit.
DEEPDREAM 2 Sets 3500lb Bearing Kit
Better for buyers looking for a bundled solution that includes bearings, races, seals, spindle nuts, washers, cotter pins, and dust caps. The kit supports 1-3/8″ to 1-1/16″ axles and uses 1.72″ ID, 2.56″ OD seals (171255TB). It provides two complete sets, which is convenient for multiple axles or future maintenance. Best for those who want a full replacement package in one purchase. Caution: confirm axle compatibility and seal dimensions with your existing hardware.
WPS 1-Pack 168233TB Grease Seal
Best for light-to-moderate use on 3,500–4,200 lb axles with #84 spindles. This double-lip seal has an ID of 1.688″ and OD of 2.332″. It’s compact and straightforward to install, making it a solid option for straightforward maintenance on standard trailer setups. Choose this if you want a dependable single-seal replacement that’s easy to source. Limitation: slightly smaller ID than some 1.719″ seals, so measure to confirm fit.
iBroPrat 4pack ID 1.719″ x OD 2.565″
Best for budget-conscious buyers needing multiple seals and cotter pins. This 4-pack aligns with 3,500 lb axles and #84 spindles, featuring a double-lip design on NBR rubber. It is compatible with Dexter 010-019-00 and similar models. The kit helps when performing back-to-back replacements on multiple hubs. Caution: verify the old seal’s size before purchasing to avoid mismatch.
XiKe 2 Set Trailer Bearings Kit
Best for buyers who want a balance of bearings, races, and a compatible seal with a typical 1-1/16″ to 1-3/16″ axle range. The kit includes the L44649/L44610 outer bearings and the 12192TB seal with an outer diameter close to 2 inches. It’s a practical option for those who prefer a broader kit rather than purchasing seals alone. Limitation: the 1.980″ seal diameter is a feature to verify against your hub’s groove before ordering.
Buying Guide
What to check before buying trailer hub seals:
- Seal dimensions: Confirm inner diameter (ID) and outer diameter (OD) match your existing seals. Even small mismatches can cause leaks or fit issues.
- Spindle compatibility: Ensure the seal is designed for #84 spindles and EZ-Lube axles if your trailer uses those components.
- Material and design: Double-lip seals with steel construction offer better wear resistance and sealing performance in wet environments.
- Bundle vs. single seal: If you need replacements for multiple hubs, bundles or multi-pack kits save time and ensure consistent wear.
- Extra hardware: Cotter pins, dust caps, and washers in kits aid installation and future maintenance.
- Durability and environment: If you tow in salty air or frequent rain, select seals and rubber compounds with robust water resistance.
FAQ
- Q: Will these seals fit 3,500 lb trailer axles with #84 spindles? A: Yes, most options shown are designed for 3500 lb axles with #84 spindles; verify dimensions before purchasing.
- Q: Should I replace bearings and seals at the same time? A: Replacing both reduces the chance of leaks and uneven wear, especially if you’re maintaining an older axle.
- Q: How do I measure the seal size? A: Measure the inner diameter (ID) and outer diameter (OD) of the old seal at the widest points, and compare to product specs.
- Q: What is EZ-Lube axles, and why does it matter? A: EZ-Lube axles have a grease fitting that facilitates easier lubrication; seals sized for EZ-Lube systems help ensure a proper seal during lubrication.
- Q: Can I mix brands for bearings and seals? A: It’s best to match sizes and compatibility; when mixing, confirm exact seal IDs and spindle fits to prevent leaks.
- Q: Do these kits include installation accessories? A: Some kits include cotter pins, dust caps, or washers; check each listing for included items.